The cycle of application includes the following recommendations:
1) PREPARATION OF SURFACES Verify that the materials to protect are free of grease, fats, oil, waxy impregnating and preesisting varnishes. Existing paint coats must be removed by sandblasting or by sandpapering with coarse grain and then fine abrasive paper at naked wood. After this operation, in order to ensure maximum adherence of fire-retardant paint on the support, carry out further cleaning using a dampened cloth with nitro thinner to remove completely from wood traces of wax. It should be checked carefully that the humidity of the wooden materials to coated is less than the value of 12% in weight. If the conditions of preparation above indicated are not respected, we don’t give any guarantee of durability of treatment.
2) TREATMENT OF SUBSTRATE Application of our product STARWOOD/W, water based primer, in amout of 80-100 g/m2 in order to confer resistance to mold and pests of wood (this treatment should be done on naked wood).
3) FIREBLOCK ® 1001/EU Application of two coats of our FIREBLOCK® 1001/EU with a consumption of 200 g/m² each if the product is applied using a roller or brush; apply one coat of paint FIREBLOCK® 1001/EU with a consumption of 400 g/m², if the product is applied by airless (dispositive airless without filter with nozzle from 31). Drying time between the 2 coats: 10 hours at +20°C. The total quantity of paint applied, therefore, amounts to 400 g/m².
For more information please fill out and submit the form below
To request more information and/or quotation on all products Starkem, fill out and submit the form below. Inserted data shall be used only to replay to your requests. Mandatory fields (*).